imgboxbg
Your location:
Homepage
/
/
/
The reason why PET strapping is not firmly packed

The reason why PET strapping is not firmly packed

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-07-29 16:30
  • Views:

(Summary description) The application range of PET strapping is very wide, glass, wood, brick, cotton, etc., which are distributed in almost every industry of strapping packaging, and have very high efficiency and safety for strapping products. But some customers report that the plastic-steel belt is not firmly packed. Do you know the reason?

The reason why PET strapping is not firmly packed

(Summary description) The application range of PET strapping is very wide, glass, wood, brick, cotton, etc., which are distributed in almost every industry of strapping packaging, and have very high efficiency and safety for strapping products. But some customers report that the plastic-steel belt is not firmly packed. Do you know the reason?

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-07-29 16:30
  • Views:
Information

      The application range of PET strapping is very wide, glass, wood, brick, cotton, etc., which are distributed in almost every industry of strapping packaging, and have very high efficiency and safety for strapping products. But some customers report that the plastic-steel belt is not firmly packed. Do you know the reason?

PET strap

1. The packer is malfunctioning. Whether you choose a manual baler or an electric baler, the baler has a tightening wheel and a stop slider that will wear out during use. After the tightening wheel and stop slider are worn, the strap will slip during tightening. Or the tightening is not tight, resulting in loose packing. It is necessary to check whether the baler is faulty, and replace the packaged parts as soon as possible when a fault occurs.

2. The specifications of PET strapping are wrong. The quality of the balers on the market is uneven, and the specifications are also varied. The specifications of the selected PET strapping straps are beyond the load-bearing range, and the straps will be loosely tied, so choose the correct specifications.

3. There is no selection of the right balers for binding. The common manual baler on the market has a tightening force of about 150 kg. For large or heavy goods, the tightening force of the manual baler limits the ultimate tensile strength of the strapping, and the packaging will not be tight or loose after the strapping. Case. Therefore, it is recommended to use pneumatic balers or electric balers for goods over 1 ton.

4. The quality of PET strapping is not good. The quality of PET strapping has a great influence on the firmness of the goods. If the quality of the strapping is not good enough, the strapping of the same specification has low tension, poor toughness, high elongation, and easy brittleness, and the phenomenon of loose packaging will occur.

    The above is an introduction to the reasons why the packaging of PET straps is not firm. If the packaging is not firm, look for the reasons one by one. For more relevant information, please follow the website of Xinmingyi Packaging. If you have a purchase requirement for PET strapping, please email or leave a message online.

Keyword:

Related Information

CN

Foshan Xinmingyi Packaging Materials Co., Ltd.

Tel: 13827744223
Email: MYBD@fsmybd.com
Q Q: 904619876
Address: In Luojia Industrial Development Zone, Danzao Town, Nanhai District, Foshan City, Guangdong Province, China

erweima

Copyright: Foshan Xinmingyi Packaging Materials Co., Ltd.   粤ICP备19147652号  www.300.cn